Full height automatic smart DC brushless motor glass sliding turnstile access control system
General introduction:
Intelligent speed gate is mainly used to prevent pedestrians illegally drilled or climbing places to implement the entrance and exit control management of high-tech products, its shape with international stainless steel profiles, fine craft, full-featured, nice, rust, durable, can resist external damage.The equipment integration mechanical, electronic, microprocessor control of electronic ticket system, access control attendance system, parking system, face recognition system, anti-static, fingerprint, palm, iris and other biometric identification system integration and use.
Features:
1. Provide normally open / normally close to satisfy management request.
2. Compatible with RF card readers, bar code readers, biometric readers, push button...
3. Equipped with infrared photocell, alarm while unauthorized entry or tailgating attempts, together with anti-strike function to protect pedestrian.
4. Expanded to automatic identification system, access control system, Traffic control, attendance check and fare collection system etc.
5. Automatically reset : lock automatically while the pedestrian not pass the lane in the pre-set time after the flap opened. The passing time is adjustable.
6. Equipped with international interface, can be easily integrated with other R/W device and managed through remote supervision computer
7. Support gate open while power failure and recover N/C mode after power on.
8. (Optional) Memory function. Can pass N pedestrians continuously by swiping card N times correspondingly (N<=16)
9. (Optional) Reversed passing alarm function, barrier will alarm if pedestrian pass from opposite direction after reading the card.
10. One direction or bi-direction is optional.
Technicial specifications:
| Housing size | 1400 long * 300 wide * 1000 high (MM) |
| | Single or bi-direction |
| Housing material | 304 Stainless steel with the thickness of 1.5mm |
| Power supply | AC200±10％V/50±10％Hz |
| Driving electromotor | 24V DC |
| Input interface | relay switch signal or 12V level signal or pulse width> 100ms 12V pulse signal, drive current> 10mA |
| LED indicator | 2 |
| Card reader windows | 2 |
| Pass speed | 40 persons/min (normal open),25~30 persons/min(normal close) |
| Gate open, off time | 1~2s |
| The time required to enter the state after power on | 3s |
| Working environment | Indoor, outdoor (with a tent over) |
| Temperature | -20℃ to 60℃ |
| Relative humidity | ≤ 90%, no condensation |
Case reference:
Product Tags:
|
|
Full Height Access Control Turnstiles Automatic Smart DC Brushless Motor 30 Watt Images
|
